HP -UX B6941-90001 Administrator's Reference Manual page 41

On IRIX 5.3, NCS 1.5.1 package netls_eoe.sw or gr_ncs.sw. On IRIX
6.2, NCS 1.5.1 package license_eoe.sw.netls.server. If neither NCS nor
DCE are found on the managed node, ITO installs llbd and
lb_admin during ITO software installation.
On IRIX 5.3, package eoe1.sw.svr4net with System V compatible
networking must be installed. On IRIX 6.2, package
eoe.sw.svr4net with System V compatible networking must be
installed.
For diskless operations IRIX NFS must be installed on a cluster
server.
Software Requirements for Siemens-Nixdorf
SINIX/Reliant Managed Nodes
The following software must be installed on SINIX/Reliant managed
nodes:
Operating System. For the supported OS versions, see Table 1-1 on
page 31.
Siemens-Nixdorf networking packages (5.43):
• tcp
• SImac596
NCS 1.5.1
If NCS is chosen as the Node Type in the ITO GUI, and NCS 1.5.1 is
not found on the managed node, ITO installs llbd and lb_admin
during the ITO agent software installation.
DCE DCE-CLNT 2.0
If the chosen communication type for the managed node is NCS RPC
and NCS is not installed on the managed node, ITO installs llbd and
lb_admin during the ITO agent software installation. If the
communciation type is set to DCE RPCS (TCP or UDP), CDE-CLNT
must be installed on the managed node
Package: attcmd
Software Requirements for Sun Solaris Managed
Nodes
The following software must be installed on Solaris managed nodes:
Chapter 1
Prerequisites for Installing ITO Agent Software
Managed Node Requirements
41