HP -UX B6941-90001 Administrator's Reference Manual page 415

Table 10-6
Task
1. Stop ITO agents,
including the control
agent.
2. Check that all ITO
agents are stopped.
3. Check again that
all ITO agents are
stopped using the list
of agent PIDs given
by the
opcagt-status
command. If any are
not stopped, execute
the kill (1M)
command.
4. Check that no ITO
processes are still
registered with the
llbd or dced/rpcd
daemons.
5. Remove temporary
ITO files.
6. Restart ITO agents.
Clean-up and Restart of ITO Agents on AIX and MPE/iX Managed
Nodes
/usr/lpp/OV/OpC/opcagt
-kill
/usr/lpp/OV/OpC/opcagt
-status
ps -eaf|grep opc
kill <proc_id>
/etc/ncs/lb_admin
/opt/dce/bin/rpccp or
/opt/dce/bin/dcecp
rm -f
/var/lpp/OV/tmp/OpC/*
/usr/lpp/OV/OpC/opcagt
-start
UNIX Managed Node Runtime Problems and
Solutions
Chapter 10
Tuning, Troubleshooting, Security, and Maintenance
AIX
Troubleshooting: Specific Problems
MPE/iX
opcagt.bin.ovopc -kill
opcagt.bin.ovopc
-status
showproc
;system;tree;pin=1
(MPE/iX processes cannot be
killed)
lbadmin.pub.hpncs
purge@.tmp.ovopc
opcagt.bin.ovopc
-start
415