HP -UX B6941-90001 Administrator's Reference Manual page 80

Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
Prerequisites for Installing the ITO Agent Software
The ITO agent software can be installed using bindery mode or NetWare
Directory Services (NDS). It is recommended to use NDS because
bindery mode may become obsolete with future releases of Novell
NetWare.
Before beginning with the installation, make sure that the following
information is known and all requirements are met:
name and IP address of the ITO management server
names and IP addresses of the NetWare managed nodes
If you use bindery mode:
• ADMIN usernames and passwords of the NetWare managed nodes
• SET BINDERY CONTEXT =
ou=<organizational_unit>.o=<organization> must be present in
SYS:SYSTEM/AUTOEXEC.NCF on each NetWare server. This is the
default Novell setting.
If you use NDS:
• ADMIN login name and password for the directory tree
the software described in "Software Requirements for Novell
NetWare Managed Nodes" on page 37 is installed and running on
each NetWare managed node.
5. Install the ITO agent software on the Novell NetWare managed
nodes.
Do not stop the ITO mangement server processes when installing the
ITO agent software.
a. On the depot server, execute the command itoinst.
The following menu options are displayed:
• Install HP IT/Operations Agent for NetWare 4.x
installs the ITO agent.
• Deinstall HP IT/Operations Agent for NetWare 4.x
de-installs the ITO agent.
• View 'READ.ME' file displays the content of README.ITO
file from SYS:/DEPOINST.ITO/ITOINST directory.
80 Chapter 2