Manually Activating The Ito Agent On Nfs Cluster Clients - HP -UX B6941-90001 Administrator's Reference Manual

SCO UnixWare
Sequent DYNIX/ptx
SGI IRIX
SINIX
Solaris
Windows NT
If necessary, for example, if the installation process could not be
reviewed in a terminal window, check the logfile below on the
management server for errors or warnings.
/var/opt/OV/log/OpC/mgmt_sv/install.log
Note that ITO agent software installation does not include configuration
distribution.
Manually Activating the ITO Agent on NFS
Cluster Clients
You can manually activate the ITO agent on an NFS Cluster Client
system. However, the ITO agent software must already be installed on
the NFS Cluster Server system, and the ITO agent software bits must be
available on the target node through an NFS mount of the ITO home
directory (/opt/OV for HP-UX, Solaris, SINIX and NCR; /usr/lpp/OV
for AIX).
The full path-name of opcactivate command is:
AIX
/usr/lpp/OV/OpC/install/opcactivate
UNIX (other)
/opt/OV/bin/OpC/install/opcactivate
For detailed information about the opcactivate command, see the
opcactivate(1m) man page. All man pages reside on the management
server.
Chapter 4
Software Maintenance on Managed Nodes
Installing or Updating ITO Software Automatically
This is the same logfile for both
installation and removal
operations. Only one record is
written for each package.
/tmp/pkgadd.log
/tmp/pkgadd.log
/tmp/inst.log
/tmp/pkgadd.log
/tmp/pkgadd.log
c:\temp\inst.log
169