HP -UX B6941-90001 Administrator's Reference Manual page 39

TCP/IP (or System View Agent on OS/2 Warp 4.0) includes two
SNMP deamons, snmpd and mib_2. Both must be running when
you install the agent software. They ensure that the management
server is able to determine the node type of the managed node. If
you want to use MIB variable monitoring, both deamonns must
continue to run after the installation.
• DCE Runtime 1.0.2 or 2.1 (part of DSS/DCE for OS/2)
• TME NetFinity required for monitoring of some MIB variables
TME NetFinity is pre-installed on OS/2 Warp 4.0 managed nodes,
but must be installed separately on OS/2 Warp 3.0 managed
nodes. The monitor template os2_cpu_util does not work on
nodes without TME NetFinity installed.
Software Requirements for Pyramid DataCenter/OSx
Managed Nodes
The following software must be installed on Pyramid DataCenter/OSx
managed nodes:
Operating System. For the supported OS versions, see Table 1-1 on
page 31.
Pyramid TCP/IP software: OpenNet TCP/IP 1.0
Gradient NCS 1.5.1 package SVR4 for MIPS: NckNidl GR1.3.0
If NCS is not yet installed on the managed node, ITO installs llbd
and lb_admin during ITO software installation.
For use in NFS cluster-client operations, the Pyramid NFS product
(OpenNet NFS 1.1) must be installed on the managed node.
Software Requirements for SCO OpenServer
Managed Nodes
The following software must be installed on SCO OpenServer managed
nodes:
Operating System. For the supported OS versions, see Table 1-1 on
page 31.
NCS 1.5.1 package or SCO DCE (DCE Executive).
If neither NCS nor DCE are found on the managed node, ITO installs
llbd and lb_admin during the ITO agent software installation.
Chapter 1
Prerequisites for Installing ITO Agent Software
Managed Node Requirements
39