File Tree Layout On Pyramid Datacenter/Osx Managed Nodes; Standalone Systems Or Nfs Cluster Servers On Pyramid Datacenter; Osx - HP -UX B6941-90001 Administrator's Reference Manual

Figure 3-12
locale
<lang>
LC_MESSAGES
NOTE
File Tree Layout on Pyramid
DataCenter/OSx Managed Nodes
The ITO software on Pyramid DataCenter/OSx managed nodes is based
on the typical SVR4 platforms as follows:
ITO Software on Pyramid DataCenter/OSx Managed Nodes
/opt/OV
bin lib
OpC
install
Standalone Systems or NFS Cluster Servers
on Pyramid DataCenter/OSx
In general, standalone systems are treated as cluster servers. The
cluster server exports the /opt file system with read-only permissions.
ITO software is located on the /opt/OV path, with the logical path name
the same as the physical path name.
By default, Pyramid DataCenter/OSx does not export the /opt file
system. You can enable ITO cluster operations manually by exporting
the /opt file system to one Pyramid DataCenter/OSx system, and then
mount it from other Pyramid DataCenter/OSx systems. You must set up
the cluster manually before the ITO installation process, so that it is
available for the ITO installation.
Chapter 3
File Tree Layouts on the Managed-Node Platforms

File Tree Layout on Pyramid DataCenter/OSx Managed Nodes

conf
include
OpC
utils
/var/opt/OV
log
tmp
OpC
OpC
conf
bin
B
bin
OpC
B
139