Command And Response Table For Sis Commands - Extron electronics SSP 7.1 User Manual

Command and Response Table for SIS Commands

Command
Serial Data Port Parameter Settings
Configure Serial Port
Parameter
View Serial Port
Parameter
Input Selection
Select audio input
View audio input
Select audio input
View audio input
Audio Mute
Mute All Output
Channels
Unmute All Output
Channels
View Mute All Status
Mute Specific Channel
Unmute Specific Channel
View Mute Specific
Channel Status
NOTE: Audio Mute All and Unmute All are global settings. They take precedence over specifically muted channels.
If specific channels had been muted prior to enabling Mute All, they lose their previous channel mute status
— they are unmuted, along with all other channels, if the Unmute All command is issued.
ASCII Command Response
(host to unit) (unit to host)
E X4@ }
CP Ccp
E }
CP Ccp
X!
$ Aud
$
Aud
X!
! All
! All
1Z
Amt
0Z
Amt
Z
Amt
X@
*1Z Amt
X@
*0Z Amt
X@
*Z Amt
Additional Description
X4@] X4@
— Baud Rate (bps)
0 = 9600
1 = 19200
X4@]
2 = 38400 (default)
3 = 115200
X!] X!
— Audio Inputs (1-5)
1 and 2 = Digital audio, optical input
X!]
3 and 4 = Digital audio, coaxial input
X!]
5 = Analog input
X!]
X#] Sets mute to On for all channels
X#
— Status
0 = Off (default)
1 = On
X#]
Sets mute to Off for all channels
X#]
Reports mute status for all channels
X@ X#]
* Set Mute to On for the selected output:
X@
— Audio Outputs (1-8)
1 = Left front
2 = Center
3 = Right front
4 = Left surround
5 = Right surround
6 = Left back
7 = Right back
8 = Subwoofer
X@ X#]
Set Mute to Off for the selected output
*
X@ X#]
Shows the Mute Status of the selected
*
output
SSP 7.1 • SIS Commands 85