Extron electronics SSP 7.1 User Manual page 89

X4!
— Mode Override Group Listening Mode Options
1 = Stereo (DOWNMIX)
2 = Mono (DOWNMIX)
3 = Dolby Pro Logic II/IIx Movie (
4 = Dolby Pro Logic II/IIx Music (
5 = DTS Neo:6 Cinema (DTS NEO:6)
6 = DTS Neo:6 Music (DTS NEO:6)
7 = Stereo to All (TO ALL)
8 = Mono to All (TO ALL)
X4@
— Baud rate (bps)
0 = 9600
1 = 19200
2 = 38400 (default)
3 = 115200
X4#
— DTS Neo:6 Center Image Control Mode
1 = Music
2 = Cinema
X4$
— Parametric EQ filter selection (1 to 9). Determines whether the corresponding
frequency range is bypassed or not. 1 is the lowest frequency range, 9 is the highest
frequency
X4%
— Parametric EQ filter frequency. Default values:
62 Hz (filter 1)
125 Hz (filter 2)
250 Hz (filter 3)
500 Hz (filter 4)
1000 Hz (filter 5)
2000 Hz (filter 6)
4000 Hz (filter 7)
8000 Hz (filter 8)
16000 Hz (filter 9)
X4^
— Parametric EQ filter Trim adjustment range in dB (-24 to +24 dB in 1 dB steps; default
0 dB).
X4&
— Parametric EQ Q value, multiplied by 1000 (from 707 to 15000; default 2000).
PL II/IIx)
PL II/IIx)
SSP 7.1 • SIS Commands 83