Extron electronics SSP 7.1 User Manual page 97

Command
Listening Mode Preference for each Mode Override Group
Set Listening Mode
Preference for each Mode
Override Group
View Listening Mode
Preference for each Mode
Override Group
Mono Source Setting (for Analog input #5 only)
Set Mono Source to Left
Channel
Set Mono Source to Right
Channel
Set Mono Source to Left
+ Right Channel
View current Mono
Source
Analog Input Gain Adjustment (for Analog Input #5 only)
Set Analog Input Gain
Level
View current Analog
Input Gain Level
Enable/Disable Parametric EQ Filter Bypass for each Output Channel
Enable Bypass
Disable Bypass
View current Bypass
status
NOTE: X!
Input (1-5): 1 and 2 = Digital audio, optical input; 3 and 4 = Digital audio, coaxial input; 5 = Analog input
X3*
— Mode Override Group: 0 = No Mode Override (no LEDs on); 1 = Multichannel Downmix (DOWNMIX);
2 = Dolby Pro Logic II/IIx (
X4!
— Mode Override Group Listening Mode Options: 1 = Stereo (DOWNMIX); 2 = Mono (DOWNMIX);
3 = Dolby Pro Logic II/IIx Movie (
6 = DTS Neo:6 Music (DTS NEO:6); 7 = Stereo to All (TO ALL); 8 = Mono to All (TO ALL))
ASCII Command Response
(host to unit) (unit to host)
E X! X3* X4!
U * * SspU
}
SSP
E X! X3* }
U * SSP SspU
E }
N1SSP SspN
E }
N2SSP SspN
E }
N3SSP SspN
E }
NSSP SspN
E X( }
A SSP SspA
E }
ASSP SspA
E X@ X4$ }
E * *0SSE SseE
E X@ X4$ }
E * *1SSE SseE
E X@ X4$ }
E * *SSE SseE
PL II/IIx); 3 = DTS Neo:6 (DTS NEO:6); 4 = To All (TO ALL)
PL II/IIx); 4 = Dolby Pro Logic II/IIx Music (
Additional Description
X! X3* X4!]
Sets the Listening Mode Preference for
* *
each Mode Override Group
X! X3* X4!]
Displays the current Listening Mode
* *
Preference for each Mode Override
Group
X1)]
Sets Mono Source
X1)
— Mono source
1 = Left
X1)]
2 = Right
3 = Left + Right (default)
X1)]
X1)]
Shows the current Mono Source Setting
X(]
Sets the Analog Input Gain Level
X(
— Input gain
0 to +24 dB in 1 dB steps (default = 0)
X(] Displays the current Analog Input Gain
X@ X4$ X#] X#
* * — Status
0 = Off (default)
X@ X4$ X#]
* *
1 = On
X@ X4$ X#]
* *
X4$
— Parametric EQ filter selection (1
to 9).
1 is the lowest frequency range
9 is the highest frequency
PL II/IIx); 5 = DTS Neo:6 Cinema (DTS NEO:6);
SSP 7.1 • SIS Commands 91