Symbols Used In This Manual - Extron electronics SSP 7.1 User Manual

Symbols Used in this Manual

When programming in the field, certain characters are most conveniently represented by
their hexadecimal rather than their ASCII values. The table below shows the hexadecimal
equivalent of each ASCII character:
Space
]
}
• —
E
The
response
X!
1 and 2 = Digital audio, optical input
3 and 4 = Digital audio, coaxial input
5 = Analog input
X@
1 = Left Front
2 = Center
3 = Right Front
4 = Left Surround
5 = Right Surround
6 = Left Back
7 = Right Back
8 = Subwoofer
X#
0 = Off
1 = On
X$
0 = Fixed (volume no attenuation)
1 = Variable (default)
X%
0 dB)
ASCII to HEX Conversion Table
Table 3. ASCII to HEX Conversion Table
— carriage return with line feed
— carriage return (no line feed)
space character
— Escape key
X/
values defined in this section are the variables used in the fields of the
table.
— Audio Inputs (1-5)
— Audio Outputs (1-8)
— Status
— Volume Output Mode
— Bass and treble adjustment range in dB -10 to +10 dB in 1 dB increments (default
.
SSP 7.1 • SIS Commands
command
79