Output Channels - Extron electronics SSP 7.1 User Manual

Listening Mode
DTS + Dolby Pro Logic IIx Music or
DTS 96/24 + Dolby Pro Logic IIx
Music
DTS + Dolby Pro Logic IIx Movie
or DTS 96/24 + Dolby Pro Logic IIx
Movie
NOTE: • shows which channels are used in each listening mode
- shows which channels are unused
S denotes that LS and RS receive the same signal
speakers can be set to Large, Small or None
1
on page
CB denotes that surround back channel either outputs to LB only in 6.0 or 6.1
setups or to LB and RB equally in 7.0 or 7.1 setups.
L/R C
• •
• •
15).

Output Channels

LS/RS or Sub-woofer
CB
LB/RB
CB
• or Yes, if LFE exists in the
LB/RB source format or L/R or
LS/RS are set to Small
• CB or Yes, if LFE exists in the
LB/RB source format or L/R or
LS/RS are set to Small
(see "Speaker Size Settings"
SSP 7.1 • Reference Material 74