Extron electronics SSP 7.1 User Manual page 93

Command
Subwoofer Output
Set Subwoofer Off
Set Subwoofer On
View Subwoofer Control
Output Channel Trim Settings
Set a specific Output
Channel Trim
View a specific Output
Channel Trim
Speaker Delay Settings
Set delay to a specific
speaker
View delay to a specific
speaker
Farthest Speaker Distance
Set distance to the
farthest speaker
View distance to the
farthest speaker
Lip Sync Offset
Set Lip Sync Offset per
input
View Lip Sync Offset per
input
ASCII Command Response
(host to unit) (unit to host)
E }
J0SSP SspJ
E }
J1SSP SspJ
E }
JSSP SspJ
E X@ X3# }
V * SSP SspV
E X@ }
V SSP SspV
E X@ X1% }
D * SSP SspD
E X@ }
D SSP SspD
E X& }
K SSP SspK
E }
KSSP SspK
E X! X2* }
Y * SSP SspY
E X! }
Y SSP SspY
Additional Description
X#]
Sets Subwoofer to Off
X#
— Status
0 = Off
1 = On (default)
X#]
Set Subwoofer to On
X#] Shows Subwoofer status
X@ X3#]
Set gain for the selected output:
*
X@
— Audio Outputs (1-8)
1 = Left front
2 = Center
3 = Right front
4 = Left surround
5 = Right surround
6 = Left back
7 = Right back
8 = Subwoofer
X3#
— Output gain and attenuation
readout in dB (-24 to +12; default = 0)
X@ X3#]
View the current gain setting for the
*
selected output
X@ X1%]
Set speaker delay for the selected
*
output:
X1%
— Speaker delay (in 0.1 ms units;
default = 0 on all channels):
X@ X1%]
View the current speaker delay for a
*
selected output
X&]
NOTE: This command is included
X&]
X! X2*]
* Sets the lip sync offset (
specified input (
X2*
X! X2*] — Lip Sync Offset 000 - 1000 in
*
0.1 ms increments (0 - 100 ms)
X!
— Audio Inputs (1-5)
1 and 2 = Digital audio, optical input
3 and 4 = Digital audio, coaxial input
5 = Analog input
SSP 7.1 • SIS Commands
for reference: it is for use
with the SSP 7.1 Setup and
Control Software only.
X2*
) for the
X!
)
87