Extron electronics SSP 7.1 User Manual page 92

Command
Speaker Configuration Information Request
View Channel Outputs
Activity
View Mute Channel
Set Speaker Size Settings
Set Speaker Size
View Specific Speaker
Size
Surround Back Speaker Settings
Set Surround Back
Speakers to none
Set Surround Back
Speaker to one small
speaker
Set Surround Back
Speakers to two small
speakers
Set Surround Back
Speaker to one large
speaker
Set Surround Back
Speakers to two large
speakers
View Surround Back
Speakers
X4)
NOTE:
is an eight digit representation with each position in the sequence representing a speaker, listed in the same order as in
0 = no audio signal present on channel
1 = channel receiving audio signal
2 = channel receiving audio signal, but muted
For example, ActCh 11122001 means the first (left front), second (center), third (right front), and eighth (subwoofer) channels are
receiving an audio signal; the fourth (left surround) and fifth (right surround) are receiving a signal but it is muted; the sixth (left back) and
seventh (right back) are not receiving a signal.
X3(
is an eight digit representation with each position in the sequence representing a speaker, listed in the same order as in
0 = unmuted
1 = muted
For example, Mut 00100001 means the right front speaker and subwoofer are muted and all other speakers are unmuted.
ASCII Command Response
(host to unit) (unit to host)
32I
ActCh
35I Mut
E X3! X1^ }
S * SSP SspS
E X3! }
S SSP SspS
E }
H0SSP SspH
E }
H1SSP SspH
E }
H2SSP SspH
E }
H3SSP SspH
E }
H4SSP SspH
E }
HSSP SspH
Additional Description
X4)]
Shows activity of each channel.
X3(]
Shows mute status of each channel.
X3! X1^]
Sets number of speakers in each group
*
X3!
— Speaker Groups
X3! X1^]
*
1 = Left and Right Front
2 = Center
3 = Left and Right Surround Sound
X1^
— Speaker group size
0 = None (invalid for front speakers)
1 = Small
2 = Large
X3@] X3@
— Surround Back Speaker Size
0 = None (default)
1 = 1 small speaker
X3@]
2 = 2 small speakers
3 = 1 large speaker
4 = 2 large speakers
X3@]
X3@]
X3@]
X3@]
SSP 7.1 • SIS Commands
X@
.
X@
.
86