Using Active Mode - Cisco AIR-PCI340 Installation And Configuration Manual

Appendix F Performing a Site Survey
Table F-1
Statistic
Channel (Frequency)
If you want to activate the site survey active mode, go to the
Step 2
Otherwise, click OK or Cancel to exit the site survey application.

Using Active Mode

Follow the steps below to activate the site survey active mode and obtain current information about your
client adapter's ability to transmit and receive RF packets.
Step 1 From the Site Survey - Passive Mode screen (see
Active Mode Setup screen appears (see
Figure F-3
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Site Survey Passive Mode Statistics (continued)
Description
The frequency that your client adapter is currently using as the
channel for communications.
Value:
Site Survey Active Mode Setup Screen
Dependent on client adapter radio and regulatory
domain
"Using Active Mode" section on page
Figure F-1), click the Setup button. The Site Survey
Figure F-3).
Using Active Mode
F-7.
F-7