Configuring Your Client Adapter - Cisco Aironet 340 Series Installation And Configuration Manual

Chapter 5 Advanced Configuration

Configuring Your Client Adapter

Configuring Your Client Adapter
The Aironet Client Utility (ACU) enables you to change the configuration parameters of your client
adapter. Follow the steps below to open ACU and make any configuration changes.
Note The driver and client utility installation process, which is documented in Chapter 3, provides
instructions to initially configure your client adapter and make it operational. Therefore, the
information in this chapter is necessary only if you need to configure your client adapter to utilize an
advanced feature.
Step 1 Double-click the Cisco ACU icon or select Start > Programs > Cisco > Aironet Client Utility. The
ACU screen appears (see Figure 5-1).
Figure 5-1 ACU Screen
The Property box lists the configuration parameters that can be changed, and the Value box contains the
highlighted parameter's current value. The Value box can appear as a drop-down list with several
possible values from which to choose or as a blank field in which characters are to be entered.
Table 5-1 lists and describes the client adapter's configuration parameters. Follow the instructions in the
table to initially set or change any parameters.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
5-2
OL-1375-02