Menu Screen Operation; General; Menu List - Icom IC-2820H Instruction Manual

■ General

MENU screen is used for programming infrequently changed
values or conditions of functions.
• Entering MENU screen and operation
q Push [F•
] to display the function guide.
w Push [MENU](V/MHz•SCAN)
screen.
[MENU]
e Rotate [DIAL] to select the desired menu group, then push
[MAIN•BAND].
r Rotate [DIAL] to select the desired item, then push
[MAIN•BAND].
t Rotate [DIAL] to select the desired condition or value, then
push [MAIN•BAND].
y Push [F•
] to return to frequency indication or push
[BACK](V/MHz•SCAN)
(Right band's)
screen.

MENU SCREEN OPERATION

to enter MENU
(Right band's)
to return the previous
z Push [
B(D-OFF)] to enter MENU screen.
SET
SET
x Push [Y] or [Z] to select the desired menu group,
B
then push [ B(D-OFF)] to enter the appropri-
SET
ate set mode.
c Push [Y] or [Z] to select the desired item, then
push [ B(D-OFF)].
SET
v Push [Y] or [Z] to select the condition or value
then push [ B(D-OFF)].
SET
b Push [
A(MW)] to exit set mode or push
CLR
[ C(T-OFF)] to return to the previous indica-
ENT
tion.

■ Menu list

ITEMS REF.
†
CALL SIGN MEMORY —
†
RX CALL SIGN —
†
DV MESSAGE —
†
DV VOICE MEMO —
SET MODE p. 101
DV SET MODE p. 103
SCAN p. 105
†
Refer to the chapter 5 for details.
14
ITEMS REF.
DUP/TONE... p. 106
DISPLAY p. 107
SOUNDS p. 109
DV GPS p. 110
PACKET p. 111
GPS SET MODE p. 111
GPS-A SET MODE p. 113
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
98