Icom IC-2820H Instruction Manual page 80

5
DV MODE OPERATION (Optional UT-123 is required)
◆ Track size setting
The track size can be changed with the following instruction.
qPush [F•
] to display the function guide.
wPush [MENU](V/MHz•SCAN)
MENU screen.
eRotate [DIAL] to select "DV VOICE MEMO" then push
[MAIN•BAND].
rRotate [DIAL] to select "TRACK SIZE" then push
[MAIN•BAND].
tRotate [DIAL] to select the desired track size.
10SEC/3TRACK : Makes 3 tracks and 10 seconds audio
15SEC/2TRACK : Makes 2 tracks and 15 seconds audio
30SEC/1TRACK : Makes 1 track only and 30 seconds
y Push [MAIN•BAND] to set the track size.
uPush [BACK](V/MHz•SCAN)
from DV voice memo screen.
59
to display the
(Right band's)
can be recorded in each track.
can be recorded in each track.
audio can be recorded in a track.
twice to exit
(Right band's)
◆ Playing-back and erasing the recorded audio
qPush [F•
wPush [REC](M/CALL•MW)
screen.
eRotate [DIAL] to select the desired audio track to be
played back or erased.
• "✱" is displayed beside the track number when the selected track
has been recorded.
rPush [≈](LOW•PRIO) to play-back the recorded audio.
• Push [||](LOW•PRIO) to pause, push [■](TONE•DTMF) to stop
play-back.
t Push [CLR](DUP•MONI) to erase the recorded audio.
yPush [BACK](V/MHz•SCAN)
frequency indication.
(default)
] twice to display the function guide 2.
to enter REC track
(Right band's)
(Right band's)
to return to