Copying Memory Contents - Icom IC-2820H Instruction Manual

■ Copying memory contents

This function copies a memory channel's contents to VFO
. This is useful when searching for
another memory/call channel)
signals around a memory channel frequency and for recall-
ing the offset frequency, subaudible tone frequency etc.
D Memory/call➪VFO
qSelect the desired band's
nel.
➥ Push the desired band's [M/CALL•MW] several times to
select memory mode or call channel, then rotate the
same band's [DIAL] to select the desired memory or call
channel.
wPush and hold [M/CALL•MW] for 2 sec. to copy the se-
lected memory/call channel contents to the VFO.
• VFO mode is selected automatically.
[EXAMPLE]: Copying memory channel 30 contents to VFO.
Front panel operation:
M/CALL
Push to select memory mode.
MW
HM-133 operation:
Push to select memory mode.
memory or call chan-
(left or right)
Rotate for selecting memory channel.
Select memory channel.
MEMORY MODE OPERATION
(or
z Push [BAND] to select the desired band as
MR/CALL
the main band, if necessary.
x Select the memory/call channel to be copied.
➥ Push [MR/CALL] to select memory mode,
MW
then select the desired memory channel
via [Y]/[Z] or keypad.
➥ Push and hold [MR/CALL] for 1 sec. then
Y/Z
push [Y]/[Z] to select the call channel.
c Push
[
CLR
memory/call channel contents to the VFO.
• VFO mode is selected automatically.
Push and hold
Push
[FUNC], then push
A(MW)] for 1 sec. to copy the selected
M/CALL
(same band's) for
MW
then push and hold
6
1
2
3
4
5
6
7
8
9
and hold
10
11
12
13
14
15
1 sec.
16
17
18
19
for 1 sec.
68