Priority Watch; Priority Watch Types - Icom IC-2820H Instruction Manual

■ Priority watch types

Priority watch checks for signals on a VFO frequency every
5 sec. while operating in memory mode. The transceiver has
3 priority watch types to suit your needs. You can also trans-
mit on the VFO frequency while the priority watch operates.
The watch resumes according to the selected scan resume
condition. See page 78 for details.
NOTE:
If the pocket beep function is activated, the transceiver au-
tomatically selects the tone squelch function when priority
watch starts.

PRIORITY WATCH

MEMORY CHANNEL WATCH
While operating on a VFO fre-
quency, priority watch checks for
a signal on the selected memory
channel every 5 sec.
MEMORY SCAN WATCH
While operating on a VFO fre-
quency, priority watch checks for
signals on each memory chan-
nel in sequence.
• The memory skip function is useful
to speed up the scan.
CALL CHANNEL WATCH
While operating on a VFO fre-
quency, priority watch checks for
signals on the call channel every
5 sec.
9
5 sec.
VFO Memory
frequency channel
5 sec.
Mch 1
Mch 2
SKIP
VFO
Mch 3
frequency
Mch 499
5 sec.
VFO Call
frequency channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
80