Configuration Tab; System Settings Page - Extron electronics DMP 64 User Manual

Configuration Tab

System Settings Page

Click the
The screen consists of fields to view and edit IP administration and system settings.
Passwords and Firmware Upgrade pages are accessed by clicking the appropriate
link on the left. For basic information about IP addresses and subnetting, see
Ethernet (LAN) Port
Figure 64.
On password-protected connections, there are two levels of protection: administrator and
user. Administrators have full access to the Passwords and Firmware Upgrade pages.
Users have view only access.
•
•
IP Settings Fields
The IP settings fields provide a location for viewing and editing settings unique to the
Ethernet interface. After editing any of the settings on this page, click the
at the bottom of the section to make the changes.
Unit Name Field
The
any valid name, up to 24 alphanumeric characters.
NOTE: The following characters are invalid in the matrix name:
tab to download the System Settings page (see figure 64).
Configuration
on page 93.
System Settings Page
Ethernet connection to the device, either entering SIS commands (see
Programming and Control
Program (see DMP Software
Connection via any RS-232 port is not password-protected.
field contains the name of the device. This name field can be changed to
Unit Name
+ ~ , @ = ' [ ] { } < > ' " ; : > \ and ?.
on page 92), or using the Extron DSP Configurator
on page 14), is password-protected.
DMP 64 • HTML Operation
SIS
button
Submit
123