Extron electronics DMP 64 User Manual page 69

Clicking a mix-point brings focus to that mix-point. A circle appears around the teal
mix-point which remains transparent. Double-clicking a mix-point opens a configuration
dialog box with the following components:
• Mono Fader — Sets the signal level from the selected input
to the output bus. Gain range is -35 dB to +25 dB. Fader
behavior is identical to the input channel gain block described
in the mic/line input section with the exception that course
adjustment (keyboard <Page Up> and <Page Down>)
increases or decreases in 5 dB increments.
• Mute — Mutes and unmutes the signal to the output bus. The
mix-point ball is transparent when muted (Mute button red) and
solid when unmuted.
• OK/Cancel — click OK to accept changes and close the box.
Cancel ignores changes and closes the dialog box.
The title above the fader reflects the input and output channel
names for the mix-point. The example on the right is the Input #1
to Output #1 mix-point set to 0.0 dB.
The input level text below the mute button indicates the input level
setting for the input gain control of the selected input signal path, in this example 0 db.
Only when the mix-point is unmuted does the circle become solid.
DMP 64 • Software Control 63