Extron electronics DMP 64 User Manual page 111

Command and Response Table for DSP SIS Commands
Command
Audio Level Control, and Mix-point Selection
NOTE: The command format is the same, regardless of the control or mix-point to be set; the acceptable adjustment
range varies depending on the control or mix-point:
• The mic/line input gain range is –
• The pre-mixer gain range is –1
• The main mix-points range –
• The post-mixer trim range is –
• The output volume range is –
All responses are shown with the DMP 64 in Verbose mode 2 or 3.
Set a trim or gain (excluding
mic/line inputs)
Example 1 (pre-mixer
gain):
Example 2 (mix-point
gain):
Set a mic/line gain
Example:
Set Output Volume
Example:
Read a trim or mix
(excluding mic/line inputs)
Example 1
(post mixer gain control):
Example 2 (mix control):
Read a mic/line gain
Example:
Audio Mute
NOTES:
•
The post-mixer trim cannot be muted.
•
All responses are shown with the mixer device in Verbose mode 2 or 3.
Audio mute
Example:
Audio unmute
Read audio mute or level
X6)
NOTES: = Audio level control, or mix-point select
X6!
= Level value; mix-point or post-mixer trim
X6@
= Mic/line gain level value
X6#
= Level value; pre-mixer gain and output volume
X6$
= Mute status
ASCII command Response
(host to device) (device to host)
18 80
dB to +
00 12
dB to + dB, in
35 25
dB to + dB, in
12 12
dB to + dB, in
100 0
dB to dB, in
E X6) X6! }
G * DsG
AU
E }
G40105*2040AU DsG40105*2040
E }
G20001*2213AU DsG20001*2213
E X6) X6@ }
G * AU DsG
E }
G40001*2288AU DsG40001*2288
E X6) X6# }
G * AU DsG
E }
60000*1548AU DsG60000*1548
G
E X6) }
G AU DsG
E }
G60101AU DsG60101*2103
E }
G20203AU DsG20203*2140
E X6) }
G AU DsG
E }
G40000AU DsG40000*2598
E X6) }
M *1AU DsM
E }
M20301*1A DsM20301*1
U
E X6) }
M *0AU DsM
E X6) }
M AU DsM
Additional description
0 1
dB, in . dB increments.
0 1
. dB increments.
0 1
. dB increments.
0
.1 dB increments.
0
.1 dB increments.
X6) X6!]
*
Set trim or mix control
a value of
] Set the #6 pre-mixer gain to a
value of -0.8 dB.
] Mix +16.5 dB of mic 1 into
output 2.
X6) X6@]
*
Set mic/line gain control
to a value of
] Set the mic/line input 2 gain
to a level of +24.0 dB.
X6) X6#]
Set output volume control
*
X6)
to a value of
]
Output 1 volume set to a level
of -50.0 dB.
X6) X6!]
DSP trim or mix control
*
set to a value of
] Output 2, post mixer trim is
set to a value of +5.5 dB.
]
+9.2 dB of mic 3 is mixed into
output 4.
X6) X6@]
Mic/line gain control
*
set to a value of
] Mic/line input 1 gain is set to a
value of +55.0 dB.
X6) ]
*1
Mute audio point
]
Mute mix-point input 4 to
output 2.
X6) ]
*0
Unmute audio point
X6) X6$]
*
See table 1 on page 111 and 112.
See tables 2, 3, and 4 on page 113 through 115.
See table 5 on page 116 through 119.
120
See table 6 on page through 123.
0
= unmute
1 = mute
DMP 64 • SIS Programming and Control
X6)
to
X6!
dB.
X6)
X6@
dB.
X6#
dB.
X6)
is
X6!
dB.
X6)
is
X6@
dB.
X6)
.
X6)
.
105