Extron electronics DMP 64 User Manual page 136

7.
Click (see figure 69, g on previous page). The program extracts and places the
Next
firmware files in a folder identified in the InstallShield Wizard window.
NOTE: Write down the folder where the firmware file is saved.
8. Click (see figure 69, h ) to exit the program.
Finish
9. Connect the PC to the device via the Ethernet port.
10. Access the device using the HTML pages (see
page 120 .)
11. Click the
Configuration
12. Click the
Firmware Upgrade
13. Click the button. An open file window appears.
Browse
14. Navigate to the folder where the firmware upgrade file was saved. Select the file.
NOTE: Valid firmware files must have the file extension '.S19'. Any other file
extension is not a firmware upgrade. The original factory-installed firmware is
permanently available on the device. If the attempted firmware upload fails for
any reason, the device automatically reverts to the factory-installed firmware.
15. Click .
Open
16. Click . The firmware upload to the device can take a few minutes.
Upload
Download the Startup Page
tab.
link.
DMP 64 • HTML Operation
on
130