Reference Information; Firmware Loader - Extron electronics DMP 64 User Manual

Reference Information

This section contains reference information for the DMP 64, including:
•
•
•

Firmware Loader

The DSP Configurator program includes a firmware loader
program which allows replacing the firmware without taking
the DMP 64 out of service. Download the desired firmware file
from the Extron website, (see
page 127 for instructions.)
To access the firmware uploader:
1.
2.
Firmware Loader
DMP 64 Hardware Reset Modes
Mounting the DMP 64
Firmware Upgrade Page
Select
Tools>Firmware Loader
The dialog box appears. Type the IP
Add Device
address of the DMP 64, then press
NOTE: If the IP has not been changed, the
default IP address is: 192.168.255.255
on
.
.
OK
DMP 64 • Reference Information 136