Reinitialize Digital I/O; Emulate Mode And Live Mode; Synchronizing - Extron electronics DMP 64 User Manual

Reinitialize Digital I/O

Should the script stop running for any reason, select
then select
To remove a digital I/O script from the DMP 64:
Only one digital I/O configuration can be active at a time. If the I/O activity needs to be
modified, remove the current configuration by:
1.
2.
3.

Emulate Mode and Live Mode

The DSP Configurator program has two operational modes,
Live
Changes affect the device in real-time and changes in the current state of the device are
reflected in the DSP Configurator. In contrast,
offline, creating or editing configurations that do not immediately affect DMP 64 operation.
The DSP Configurator program always starts in
DSP Configurator program are available without connecting to the DMP 64. The user
can build a configuration from the blank screen, or open an existing file that contains the
last configuration displayed plus saved presets. All settings and adjustments are saved
to a configuration file on the PC. When the saved file is opened in the DSP Configurator
program, the program restores all settings as the current configuration (emulated if in
Emulate
Live
configuration, after creating a configuration, or after loading a previously saved
configuration file.
In
current state is titled,
Synchronizing: Pull From or Push To the DMP 64
When switching to
Emulate
•
•
Live
audio output.
Reinitialize Digital I/O
From the menu, click
Tools
I/O Configuration from the Device
If the DSP Configurator is connected to a device, the I/O configuration is removed. If it
is not connected, a connection dialog box appears.
Make certain the connection information is correct, then press
configuration script is removed and a confirmation dialog box will appear.
mode, the program has established a connection and is synced with the DMP 64.
mode or live if in
Live
mode can be entered at any time after program launch, either with a blank
mode, the current state is titled
Emulate
Current State
mode after making changes to the current configuration in
Live
mode, either:
data from the device and update the DSP Configurator program configuration.
Pull
This option downloads device settings from the DMP 64 and synchronizes it with the
DSP Configurator program overwriting the current DSP Configurator settings, or
data from the DSP Configurator program to the device, overwriting settings in
Push
the DMP 64.
mode can also be used to tailor audio settings in real time while listening to the
Tools > Configure Digital I/O
. This option is only available in Live mode.
Configure Digital I/O
and click .
OK
mode allows the user to work
Emulate
mode. All functions of the
Emulate
mode).
Current Emulation
.
DMP 64 • Software Control
, then select
Remove Digital
. The I/O
OK
and . In
Live Emulate
. In mode, the
Live
,
76