Extron electronics DMP 64 User Manual page 30

• Configure Digital I/O Ports — Live mode only. Opens a utility to configure
digital I/O ports. The DMP 64 provides six digital I/O ports that can be used to trigger
external events from DMP 64 actions, or for external events to trigger DMP actions
(see Digital I/O Ports
• Connect to/Disconnect from Device (depending on Emulate or Live
mode) — Performs the same functions as the Mode Emulate and Mode Live
buttons.
• Issue RESET Command — Initializes and clears the following: mix-points, presets,
processor blocks, and gain blocks. This reset is identical to the E ZXXX } SIS
command (see SIS Programming and Control
• Save changes to device — Live mode only. Saves configuration changes
made in the DSP Configurator program to the DMP 64.
• Firmware Loader — Calls the Firmware Loader program, which allows updates
without taking the DMP 64 out of service (see
• Configure Groups — Opens the configure groups dialog box (see
Masters on page 69).
• Device Settings — Live mode only. Opens a dialog box providing a means to
change the IP address, set administrator and user passwords, and select the serial
port baud rate.
• Options — Opens a tabbed dialog box to customize the DSP Configurator
appearance and operation.
Colors — Tailor the appearance of
•
the various graphs and dialog boxes.
uses a selected color scheme
Appearance
for the complimentary and graph colors.
Complimentary Colors
selection of colors used with the various
graphs and dialog boxes.
change the row colors containing the
information and descriptions of the graphs
seen in the processor blocks.
Preferences — The startup splash screen contains options to select the
•
device to connect to, or to "Always ask" on startup.
The selection can be changed using
If Show Meters is set to
•
Block Meters is used to tailor the
appearance of the dynamics meters to
use the full meter to show input and gain
reduction, or to show the level based on the
output and gain reduction.
on page 75).
on page 92).
Firmware Loader
allows custom
Graph colors
Default Device
, Dynamic
True
on page 136).
Group
.
DMP 64 • Software Control 24