Deleting A Group Master; Viewing And Using A Group Master; Add A Group - Extron electronics DMP 64 User Manual

Deleting a Group Master

To delete a group:
1. Click
Tools > Configure Groups
or click
2. In the
to select it.
3. Click the
4. Click
Yes

Viewing and Using a Group Master

Click
View > Group Controls
group controls dialog contains two menu items:
•

Add a Group

•
Tools
In addition, once groups are created, a single mute button or a group fader plus the
current setting readout and any soft limits that have been set are visible.
Figure 49.
The group fader controls function as follows:
• Slide a group fader up and down to adjust all gain controls in the group.
• Click and drag a soft limit ( ) to set the ceiling and floor for the group.
NOTE: Soft limits cannot be dragged beyond the current setting of the group
fader.
Add a Group
To launch the configure groups dialog from the group controls window, click
Add a Group
group controls window refreshes to display the added control.
NOTE: If a block is muted when the group mute is selected, that block remains
muted when the group mute is released.
View > Group Controls
drop-down box, click a numbered group (such as "Group #1")
Select Group
Delete Current Group
in the
Confirm Deletion
to open the group controls dialog box (see figure 49). The
allows you to add additional groups.
enable you to perform various functions from the group controls window.
Group Controls Dialog Box
. When a new group is added and the
to open the configure groups dialog box
and then click
Add a Group
button in the lower left area.
dialog box.
Add New Group
DMP 64 • Software Control
.
dialog is closed, the
72