Managing Presets - Extron electronics DMP 64 User Manual

Managing Presets

Once a preset is created (whether or not the DSP Configurator file is saved), it appears in
the preset list, available from the DSP Configurator user interface.
In and mode, after a preset is selected from the list, action buttons
Live Emulate
become available next to the presets bar.
The user can either
Recall
emulation or state), or
Delete
In mode, selecting
Live Recall
elements) from the stored preset, overwrites that portion of the current state, and then
switches the drop-down list to read
In mode, the
Emulate Recall
elements ("marked" elements) from the file, overwrite the information contained in the
DSP Configurator as the current emulation, then switch the drop-down list to read
.
Current Emulation
When a preset is previewed in either
available. When pressed in live mode, the preset is deleted from the hardware, which
is reflected in software (it is removed from the preset list). After disconnecting from the
device and before exiting the program, the file must then be saved to retain this change. If
pressed in emulate mode, the preset is deleted from the file in software, which must then
be saved (before exiting) to retain this change. In either mode, the
the preview action and returns the user to current state or current emulation, respectively.
Presets: Pull vs. Push or Create Live
When a preset is pulled from the device, the preset data remains in the device until the
preset is recalled. The DSP Configurator pulls only the names of the presets. These
presets cannot be saved to disk until they have been recalled.
An asterisk next to the preset name indicates that only the preset name has been pulled
from the device, and the preset data exists only in the device (it has not been recalled).
Presets pushed to the device or created in
asterisk can be saved to disk.
(make the preset active),
Cancel
the preset.
applies the currently displayed preset elements ("marked"
.
Current State
action button applies the currently displayed preset
or mode, the
Live Emulate
mode have no asterisk. Presets with no
Live
(return to the current
button is
Delete
button defeats
Cancel
DMP 64 • Software Control 83