Dsp Configurator Program Basics; Starting The Program; Using The Program - Extron electronics DMP 64 User Manual

3.
4.
USB driver installation is complete.

DSP Configurator Program Basics

Starting the Program

NOTE: Extron recommends connection via the Ethernet LAN port for running the
To run the DSP Configurator Program, click
Start > Programs > Extron Electronics > DSP Configurator > DSP
Configurator
The DSP Configurator program starts in
(see

Using the Program

In Emulate mode, audio parameters can be selected, then transferred to the DMP 64
by switching to Live mode (while connected to a DMP 64). Audio settings can also be
tailored while connected to the DMP 64 which allows real-time auditioning of the audio
output as adjustments are made (see
When the installer has completed the installation of the USB drivers, the following
screen appears (see figure 14):
Figure 14. Successful USB Driver Installation
Click .
Finish
DSP Configurator program.
.
Emulate Mode and Live Mode
mode (see figure 15, next page). Also
Emulate
on page 76) for details of mode operation.
Emulate Mode and Live Mode
DMP 64 • Software Control
on page 76).
18