Setting The Server Iscsi Host; Setting The Server Accessible Lun Groups (Setting Affinity Groups); Table 2.13 Sense Data Conversion Setting For Oracle Vm Server - Fujitsu ETERNUS DX400 series Configuration Manual

Chapter 2 ETERNUS DX Connection Settings
2.1 Common Settings
2.1.2.6 Oracle VM Server
For Oracle VM Server, perform the settings detailed in

Table 2.13 Sense Data Conversion setting for Oracle VM Server

Oracle VM Server
2.1.3

Setting the Server iSCSI Host

Register the IP addresses and iSCSI names of each server that will access the ETERNUS DX. At the same time,
set the Host Response No. registered in
Registering the IP addresses and setting up host affinity groups in
(Setting Host Affinity Groups)" (page 13)
ETERNUS DX LUNs.
See "Set iSCSI Host" of "ETERNUSmgr User Guide" for details.
2.1.4

Setting the Server Accessible LUN Groups (Setting Affinity Groups)

Create the server accessible LUN groups (Affinity Groups).
See "Set Affinity Group" of "ETERNUSmgr User Guide" for details.
When the server OS is HP-UX, Windows®, Linux, VMware ESX, or Oracle VM Server, assign the Affinity Groups
starting from LUN0 and continuing in ascending order. The server cannot recognize the ETERNUS DX LUNs
unless they are assigned in this order.
This restriction does not apply when the server is running a Solaris OS.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
OS [Sense Data Conversion] setting
(When not using GRMPD)
"2.1.2 Sense Data Conversion (Setting the Host Responses)" (page
allows limits to be set on which servers are allowed to access which
Copyright 2014 FUJITSU LIMITED
Table 2.13.
Linux Recommended
"2.1.5 Creating and Allocating LUN Groups
12
9).
P3AM-3972-08ENZ0