Adding An Endpoint Group - Cisco TelePresence 7010 Help Manual
Telepresence server 7010 and mse 8710 in locally managed mode
Hide thumbs
Also See for TelePresence 7010:
- Installation manual (204 pages) ,
- Product user manual (151 pages) ,
- Help manual (92 pages)
Table of Contents
Advertisement
Endpoints and endpoint groups
Adding an endpoint group
You can configure individual endpoints to work as a single, immersive endpoint. To use this feature you must
have the "Third party interop" feature key installed. You can install feature keys on the
Upgrade
page. (See
Upgrading and backing up the Cisco TelePresence
Note: A multi-screen endpoint is not the same as an endpoint group.
The TelePresence Server supports a maximum of 200 endpoints. Each member of an endpoint group counts
as one endpoint towards this maximum, so a group could count as up to four endpoints, but a multi-screen
endpoint only counts as one.
All group members will also share one of the endpoint's audio capabilities - unlike multi-screen endpoints
which typically associate audio streams with video streams - which means that the TelePresence Server is
unable to tell which camera is associated with the audio contribution. It cannot determine which camera is
pointing at the person who is speaking, which in turn prevents the ActivePresence layout from working
properly for grouped endpoints.
To add an endpoint group:
1. Go to
Endpoints > Add grouped
2. Enter the Name of the group and the addresses of its members. See the table below.
3. Click Add grouped endpoints.
4. Configure the endpoint group in the same way as you would configure an individual endpoint. Refer to the
edit endpoint topic
for details of the settings.
Endpoint group members
Table 41: Endpoint group settings
Field
Field description
Name
The name of the group.
Comma-
The list of addresses to call out to when this
separated
group is in an active conference.
address list
Call direct
Select this check box to call direct when
calling this group.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
endpoints.
Usage tips
Enter a list of addresses separated by
commas.
Note: The order must be from left to right in
terms of facing the endpoints' screens.
Configuration >
Server.)
Page 82 of 132
Advertisement
Table of Contents
