Cisco TelePresence 7010 Help Manual page 44

Configuration
Table 27: Default endpoint settings (continued)
Field Field description
Default layout This option controls the default layout multi-
type for multi- screen endpoints see when they connect.
screen
Select a setting from the drop-down list to be
endpoints
used as the default:
Single (Full screen): Endpoints will be
n
shown in full screen panes. A single
participant displays per screen.
ActivePresence: Endpoints will always be
n
shown in full screen panes with additional
participants appearing in up to six equally
sized overlaid panes at the bottom of each
screen (up to four panes for 2 and 4 screen
endpoints).
Allow content This option allows the TelePresence Server
in main video to send a conference's content channel in the
main video channel of endpoints that do not
support the extra channel.
Endpoints that would otherwise be unable to
see the content channel can see it if you
enable this feature.
In these cases, the content channel video is
shown in the largest pane of a composed
layout. The content layout replaces the main
video while the content channel is active
(audio is unaffected).
Table 28: Default advanced endpoint settings
Field Field description
Video format The format to be transmitted by the
TelePresence Server to an endpoint or
endpoint group.
Select a setting from the drop-down list:
PAL - 25fps: The TelePresence Server will
n
transmit video at 25 frames per second (or
a fraction or multiple of 25, for example:
50 or 12.5fps)
NTSC - 30 fps: The TelePresence Server
n
will transmit video at 30 frames per
second (or a multiple or fraction of 30, for
example: 60 or 15fps)
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
Participants can change their layout using Far
End Camera Control or via DTMF keys 2 and
8, or ActiveControl if supported in the
deployment.
The default is ActivePresence.
Content does not entirely replace the main
video; the content displays in the largest pane
of a composed layout that also shows the other
participants' streams across the bottom of the
screen (more about layouts).
The default is enabled.
For more information about the content
channel, see Content channel video
Usage tips
NTSC is typically used in North America,
while PAL is typically used in the UK and
Europe.
The default is NTSC - 30 fps.
support.
Page 44 of 132