Cisco TelePresence 7010 Help Manual page 60

Conferences
Table 31: Conference (continued)
Field Field description
PIN Enter the unique PIN for the conference.
Register Whether to register the conference with the
numeric ID Numeric ID as the H.323 ID.
with H.323
gatekeeper
Register Whether to register the conference's Numeric
numeric ID ID with the SIP registrar.
with SIP
registrar
Conference Locks a conference.
locked
Encryption Whether encryption is optional or required for
this conference.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
Setting a PIN allows you to restrict access to
the conference. Up to 40 digits are supported
for a PIN. When entering the conference
participants will be presented with a PIN entry
screen and an audio prompt. The PIN can be
entered via DTMF.
Press * to delete the entire PIN.
A PIN is only valid for incoming calls—no
outgoing calls will ever need to enter it. As a
result of this, a conference PIN can only be set
when the conference has a numeric ID. Trying
to set a PIN without a numeric ID will return a
fault.
Select this check box to register the
conference's numeric ID with the gatekeeper (if
H.323 registration is enabled on the
Configuration > H.323 Settings
Check the box to register the conference's
numeric ID with the registrar (if SIP registration
is enabled on the Configuration > SIP
Settings page)
Check the box to lock the conference. You can
still add pre-configured participants before the
conference starts, but no participants will be
able to join (call in) when the conference is
active.
You can call out to invite participants in to a
locked conference.
If encryption is Required, only endpoints that
support encryption can join this conference.
Encryption requires a feature key. Feature
keys are installed in the Configuration >
Upgrade page. See Upgrading and backing
up the TelePresence Server.
page).
Page 60 of 132