Cisco TelePresence 7010 Help Manual page 79

Endpoints and endpoint groups
Table 40: Status (continued)
Field Field description
Endpoint The capabilities that the endpoint
advertised advertised when negotiating the
capabilities call.
Video Whether receive and transmit
channels video channels are open
between the Cisco TelePresence
Server and the far end.
Audio Whether receive and transmit
channels audio channels are open
between the Cisco TelePresence
Server and the far end.
Received The audio gain mode that is
audio gain configured, on the endpoint, for
mode audio received from the
TelePresence Server. One of
<use default>, Automatic, Fixed,
or Disabled.
Extended Whether receive and transmit
video extended video channels are
channels open between the Cisco
TelePresence Server and the far
end.
Far end Whether the audio from the far
audio mute end has been muted by the
remote device.
Bandwidth The amount of network bandwidth
used for this call's media in each
direction.
Encryption If encryption is in use for this call,
check the encryption check code is
code shown here.
Preview Sample stills of the video stream
(s).
Endpoint X (Endpoint groups only) The
connection status of each
endpoint in an endpoint group.
Duration The time that the
endpoint/endpoint group has
been in this conference.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
For example: Audio, Video, Video content, Encrypted traffic,
Unencrypted traffic, ActiveControl.
<use default>: This endpoint has inherited the Automatic Gain
Control setting of the conference.
Automatic: The TelePresence Server dynamically adjusts the
gain of the audio received by this endpoint to approximate the
levels received by the other participants.
Disabled: Gain control is disabled for the audio received by
this endpoint.
Fixed: The TelePresence Server adjusts the endpoint's
received audio by a fixed ratio. This is configured in the
Received audio gain field on the endpoint's settings page.
This field only provides correct information for H.323 endpoints
otherwise always off.
For an endpoint group, this shows the bandwidth for each call
rather than the total combined bandwidth.
The check code can be used in combination with information
displayed by some endpoints to check that the encryption is
secure.
The preview shows a still from each screen for both the receive
stream (top row) and the transmit stream (bottom row). You can
click to refresh the preview.
Page 79 of 132