Chapter 3
Setting Up the WLSE
Adding Users
Note
Step 1
Step 2
Step 3
Step 4
Step 5
78-16778-01
You can add users and configure their access to the WLSE Web interface and their
access to the CLI. User access to the Web interface is determined by the roles
assign to each user account. Users can only perform WLSE functions that are
allowed by their logins.
For information about using alternative sources of authentication, see the online
help or the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release
2.11.
To create users:
Select Administration > User Admin > Manage Users.
Enter a user name, password, and email address in the appropriate fields.
Select the user's CLI access level.
Select the user's role. A user's role determines which WLSE features that user is
allowed to access. The WLSE provides the following default user roles and you
can create others and assign access to tabs and subtabs to your roles.
System Admin
•
Network Admin
•
Network Operator
•
Help Desk
•
The System Administrator role cannot be modified or deleted. You cannot
Note
delete the other default roles, but you can modify the privileges of such
roles.
Click Add to create the user.
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
Adding Users
3-13