Editing An Endpoint's Configuration - Cisco TelePresence 7010 Help Manual

Endpoints and endpoint groups

Editing an endpoint's configuration

1. Go to Endpoints.
2. Click the name of the endpoint or group.
3. Go to Configuration.
4. Edit the configuration with reference to the following table.
5. Click Update endpoint.
6. You may also need to
Endpoint settings reference
Note 1: Endpoints inherit the values for these settings from those defined in the TelePresence Server's
Configuration > Default endpoint settings
inherited value, the endpoint's local setting always takes precedence over the system-wide setting.
Note 2: Not all of these settings apply to all endpoint types or groups. These differences are detailed in the
table.
Note 3: You can also change settings for endpoints currently in conferences by clicking the endpoint name
on the conference status page, and accessing its configuration page from there.
Table 42: General settings
Field Field description
Name The name of the endpoint or
endpoint group.
Type The number of endpoints in the
endpoint group is displayed.
Display The name that will be displayed
name in a conference as a label for this
override endpoint or group.
Minimum When choosing which
screen conference layout to send to a
layout participant the Cisco
TelePresence Server takes into
account the number of screens
used by other participants in the
conference.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
edit the advanced settings of the endpoint or
page. If you change a local setting to something other than the
Usage tips
When you are updating an existing endpoint or endpoint
group's configuration, its Type is also shown.
The type of endpoint is shown in all cases. The Type field
does not show when you are adding a new endpoint.
The name you enter here will override any default name
configured on the endpoint. It will also override any other
default name that might appear for an endpoint. For example,
an endpoint's default name can be the name of the gateway
through which the call was placed, or if the endpoint is called-
in via a gatekeeper, its E.164 number.
For more information, see
display in layout
group.
Understanding how participants
views.
Page 84 of 132