Cisco TelePresence 7010 Help Manual page 85

Endpoints and endpoint groups
Table 42: General settings (continued)
Field Field description
Received Select how the audio gain on the
audio gain stream from the TelePresence
mode Server is controlled. One of <use
default>, Automatic, Disabled, or
Fixed.
Received This field is inactive unless you
audio gain select Fixed for the Received
audio gain mode. In Fixed mode,
you can enter a decibel value by
which to adjust the amplification of
the incoming audio signal.
Transmitted Adjusts the amplification of the
audio gain outgoing audio signal.
Allow Select from the drop-down list to
stereo <use default>, disable or enable
audio to allow stereo audio in calls with
compatible endpoints.
Use *6 to Determines whether this endpoint
mute audio is allowed to Mute/Unmute with
the *6 combination on its keypad.
Auto Select from the drop-down list to
reconnect disable or enable auto reconnect.
Always Enables or disables persistent
reconnect automatic reconnection.
Defer Enables or disables defered
connection connection of this endpoint.
Auto Enables or disables automatic
disconnect disconnection of this endpoint.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
<use default>: This endpoint will inherit the Automatic Gain
Control setting of the conference, which means that AGC will
either be enabled or disabled.
Automatic: The TelePresence Server dynamically adjusts the
gain of the audio received by this endpoint to approximate the
levels received by the other participants.
Disabled: Gain control is disabled for the audio received by
this endpoint.
Fixed: Adjusts the received audio by a fixed ratio, entered in
dB in the Received audio gain field.
A fixed audio gain of between -12 dB and +12 dB (in 3 dB
steps) is applied to the endpoint's incoming audio.
A fixed audio gain of between -12 dB and +12 dB (in 3 dB
steps) is applied to an endpoint's outgoing audio.
Allow stereo audio should be enabled by default. However,
some endpoints do not support stereo echo cancellation and
in some circumstances this can cause echo. If necessary,
disable this option to prevent the use of stereo audio, either
for a specific endpoint or by default.
Select <use default> to inherit the default selection for this
setting, or override the default by selecting either Enable or
Disable
If Auto reconnect is enabled and you call out to an endpoint
and it drops out from the conference because of a network
problem the TelePresence Server will automatically try to
reconnect. Note that it will not reconnect if the endpoint hangs
up the call in a normal way.
The TelePresence Server will always attempt to reconnect the
endpoint, even after deliberate disconnection.
Note: This feature is intended for reconnecting integrated
systems and should not be used with user endpoints.
When enabled, the TelePresence Server will wait for other
participants to join before automatically connecting this
endpoint. When disabled, the TelePresence Server connects
this endpoint as soon as the conference starts.
When enabled, the TelePresence Server automatically
disconnects this endpoint from the conference when other
participants disconnect. When disabled, the participant either
manually disconnects or persists until the conference ends.
Page 85 of 132