SET0100000
1 Adding a System Board
This appendix describes various operations required for installation.
SET0101000
1.1 Conditions for adding Components
SET0101010
1.1.1 Number of mounted system boards
- The number of maximum mounting is four.
SET0101020
1.1.2 Conditions concerning combined use of system boards
- The conditions for adding components described in Chapter 2 Adding a CPU Module
must be satisfied.
- The conditions for adding components described in Chapter 3 Adding Memory
must be satisfied.
- The conditions for adding components described in Chapter 4. Adding a Memory Expansion Board
(SET0400000)
SET0101030
1.1.3 Main unit status
- Table 1.1.3 lists whether an SB addition can be added in each main unit status.
Main unit status
- AC power to the main unit is off
(Cold maintenance (AC power off))
- AC power to the main unit is on
- System Powered Off
(Cold maintenance (standby))
- AC power to the main unit is on
- System Powered On
(Hot maintenance)
must be satisfied.
Table 1.1.3
Work possible?
Yes
Yes
No
10
(SET0200000)
(SET0300000)
CA92344-0577-01