Cisco TelePresence 7010 Help Manual page 70

Conferences
Table 36: All participants (continued)
Field Field description
Status The status of the endpoint.
More... Click More... to see previews of the transmit
and receive streams. You can also control the
endpoint's contribution to the conference.
Click [Expand / Collapse All] to show more
status information for all endpoints in the list.
Table 37: Previous participants
Field Field description
Endpoint The names of endpoints that were previously
in this conference.
Type The endpoint type.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
One of:
Joining conference - the endpoint is joining
n
this conference
In conference - the endpoint is currently
n
participating in this conference.
Attempting to re-establish call - the endpoint
n
is busy and a retry is occurring.
Additional status information may be
displayed, for example, xx failed to join.
(grouped endpoints), packet loss detected,
video to muted, video from muted, video muted
(and the equivalent for audio), important and
audio-only.
If a pre-configured endpoint is busy when the
conference starts, the TelePresence Server
will retry the endpoint up to five times
throughout the conference and connect it if it
becomes free. The retry intervals are 5, 15, 30,
60 and 120 seconds.
You can:
mute and unmute
mute and unmute
make a participant important (transmit stream
only) or unimportant
Usage tips
To reconnect participants to the conference:
select the appropriate check boxes and select
Retry connection.
Click on the endpoint's name to go to its
Status page.
audio
video
Page 70 of 132