Endpoint Interoperability - Cisco TelePresence 7010 Help Manual

Reference

Endpoint interoperability

Table 67: Endpoint feature support
Feature Endpoints that support this
Reveal loudest T3, CTS 3200, CTS 3000, TX9000, TX9200
participant for
panel switched
layout
Add legacy CTS 500
n
TIP endpoint
CTS 1000
n
CTS 1100
n
CTS 1300
n
CTS 3000
n
CTS 3010
n
CTS 3200
n
CTS 3210
n
Conference CTS 500
n
ending
CTS 1000
n
notification
CTS 1100
n
CTS 1300
n
CTS 3000
n
CTS 3010
n
CTS 3200
n
CTS 3210
n
TX9000
n
TX9200
n
OneTable T3
mode
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Notes
CTS 1300 and endpoint groups do not reveal
the loudest participant.
You must add these endpoints using Add
legacy TIP endpoint if they are running
versions 1.6.x or 1.7.x (up to and including
1.7.3) of the CTS software.
You may be able to add these endpoints using
Add new endpoint if they are running
CTS software versions 1.7.4 or higher.
Note: endpoints can only be added in Locally
Managed mode as Remotely Managed mode
does not allow preconfigured endpoints.
These endpoints generate their own
conference ending warning when they receive
notification from the TelePresence Server. They
show an icon instead of an overlaid message
as seen by other types of endpoints.
If several participants in the conference are
using these endpoints, and if OneTable mode
is enabled, then the TelePresence Server will
use the OneTable layout mode.
Page 123 of 132