Cisco TelePresence 7010 Help Manual page 43

Configuration
Table 27: Default endpoint settings (continued)
Field Field description
Show borders Check this option to show borders around
around participants displayed in the conference view
endpoints sent to new endpoints/endpoint groups by
default.
Active Check this option to show a red border
speaker around the active speaker.
display
Show endpoint The TelePresence Server will label panes in
names as the conference layout sent to new
panel labels endpoints/endpoint groups by default, with
the names of the participants shown in those
panes.
Check the box to show display names by
default.
Self view If you uncheck this option, the TelePresence
Server will never show the video stream sent
from this endpoint or endpoint group to the
participants using this endpoint or endpoint
group by default i.e. they will not see
themselves.
Default layout This option controls the default layout single-
type for screen endpoints see when they connect.
single-screen
Select a setting from the drop-down list to be
endpoints
used as the default:
Single: Endpoints will be shown in one full
n
screen pane.
ActivePresence: Endpoints will be shown in
n
one full screen pane with additional
participants appearing in up to nine equally
sized overlaid panes at the bottom of the
screen.
Prominent: Endpoints will be shown in one
n
large pane with additional participants
appearing in up to four equally sized
panes at the bottom of the screen.
Equal: Endpoints will be shown in a grid
n
pattern of equally sized panes on the
screen, up to 4x4.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
For more information, see
participants display in layout
The default is enabled.
This setting is only available if Show borders
around endpoints (detailed above) is selected.
The default is enabled.
The default is disabled.
For more information, see
participants display in layout
The default is disabled.
The default setting is ActivePresence.
Participants can change their layout using Far
End Camera Control, DTMF keys 2 and 8, or
ActiveControl if supported in the deployment.
Equal is automatically used if the multi-screen
system in the conference does not send the
TelePresence Server a loudest panel/screen
indication.
Note: Grouped endpoints share one audio
stream, so Equal will be used on single screen
endpoints whenever a grouped endpoint is in
the conference.
See the endpoint interoperability reference
a list of the multi-screen systems that reveal
the loudest panel information.
Understanding how
views.
Understanding how
views.
for
Page 43 of 132