Viewing Network Statistics (Netstat) - Cisco TelePresence 7010 Help Manual

Network settings

Viewing network statistics (netstat)

Go to Network > Netstat
Server.
The netstat data refereshes each time you load or refresh the UI page, or when you click Refresh, or when
you check or clear the Resolve names checkbox.
Table 22: Netstat field descriptions
Field Description
Resolve Check the box to perform a DNS lookup on the addresses and show hostnames if possible, or clear
names the box to show the IP addresses instead. The data refreshes when you toggle the checkbox.
Protocol tcp4, tcp6, udp4, or udp6, indicating which internet protocol and addressing scheme the connection is
using.
Recv-Q Count of bytes queued on this connection because they have not yet been processed by the
TelePresence Server.
Send-Q Count of bytes queued on this connection because they have not yet been acknowledged by the
remote party.
Local The address of the TelePresence Server on this connection. If Resolve names is not checked this
Address field shows the local socket as address:port. If Resolve names is checked it shows the socket as
hostname:servicename if possible.
Eg. ts.example.com:http or 127.0.0.1:80
Foreign The address of the remote party on this connection. If Resolve names is not checked this field shows
Address the foreign socket as address:port. If Resolve names is checked it shows the socket as
hostname:servicename if possible.
Eg. browser.example.com:http or 192.168.3.1:80
State The state of the connection. For more information, see
Service The name of the service that the TelePresence Server provides on this connection. The service name
is hyperlinked to the
necessary.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
to view the current status of all TCP and UDP connections to the TelePresence
Network > Services
http://tools.ietf.org/html/rfc793#section-3.2
page so you can change the service configuration if
Page 31 of 132