Cisco TelePresence 7010 Help Manual page 87

Endpoints and endpoint groups
Table 44: Call-in match parameters
Field Field description
Name The name that the endpoint or
endpoint group sends to the
TelePresence Server.
Address The IP address of the endpoint
or endpoint group.
E.164 For H.323 calls, the E.164
address with which the
endpoint or endpoint group is
registered with the
gatekeeper.
For SIP calls, the SIP
username with which the
endpoint or endpoint group is
registered with the SIP
registrar.
Table 45: Initial status
Field Field Usage tips
description
Audio Whether the If set to Muted, when the endpoint or endpoint group joins a conference, it will not be
from initial audio able to contribute audio to the conference. For example, you can mute audio from an
from the endpoint or endpoint group if somebody wants to be seen in the conference, but does
endpoint or not want to contribute verbally. You can mute both audio and video if required. This can
endpoint be altered during the course of the conference either in the endpoint's or endpoint
group is group's status page, or from the relevant conference's status page.
either Active
or Muted.
Audio Whether the If set to Muted, when the endpoint or endpoint group joins a conference, the participant
to initial audio using this endpoint or endpoint group will not be able to hear the other participants. This
to this can be altered during the course of the conference either in the endpoint's or endpoint
endpoint or group's status page, or from the relevant conference's status page.
endpoint
group is
either Active
or Muted.
Video Whether the If set to Muted, when the endpoint or endpoint group joins a conference, it will not be
from initial video able to contribute video to the conference. For example, you can mute video from an
from this endpoint or endpoint group if somebody wants to see the conference, but not be seen
endpoint or themselves. You can mute both audio and video if required. This can be altered during
endpoint the course of the conference either in the endpoint's or endpoint group's status page, or
group is from the relevant conference's status page.
either Active
or Muted.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
These fields are used to identify incoming calls as being from the
endpoint or endpoint group.
The endpoint or endpoint group is recognized if any of this
information matches the identification sent by the endpoint. The
TelePresence Server ignores empty fields when it is trying to match
the endpoint.
When you configure Call-in match parameters, an endpoint or
endpoint group will be recognized as this pre-configured endpoint or
endpoint group and the Initial status parameters will be applied to a
call from this endpoint or endpoint group.
Note: For CTS systems, Cisco recommends using the CTS directory
number (DN) in the E.164 field.
Page 87 of 132