Cisco TelePresence 7010 Help Manual page 94

Endpoints and endpoint groups
Table 50: Optimization settings (continued)
Field Field description
Video Selecting this check box allows the
transmit TelePresence Server to vary the
size resolution, or resolution and codec, of the
optimization video being sent to a remote endpoint
within the video channel established to
that endpoint.
Select a setting from the drop-down list:
None: Do not allow video size to be
n
changed during transmission
Dynamic resolution only: Allow video
n
size to be optimized during transmission
Dynamic codec and resolution: Allow
n
video size to be optimized during
transmission and/or dynamic codec
selection
Table 51: Audio settings
Field Field description
Screen (For grouped endpoints only)
receiving/transmitting
Select the member endpoint that will contribute and receive the audio channel
audio
when this endpoint group is in a conference. Click Update endpoint.
Table 52: Content settings
Field Field description
Screen (For grouped endpoints only)
receiving/transmitting
Select the member endpoint that will contribute and
content
receive the content channel when this endpoint group
is in a conference. Click Update endpoint.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
With this option enabled, the TelePresence Server
can, for instance, decide to send CIF video within a
4CIF channel if this will increase the viewed video
quality.
The circumstances under which decreasing the
video resolution can improve the video quality
include:
if the original size of the viewed video is smaller
n
than the outgoing channel
if the remote endpoint has used flow control
n
commands to reduce the bandwidth of the
TelePresence Server video transmission
Typically, lowering the resolution means that the
TelePresence Server can transmit video at a higher
frame-rate.
Usage tips
For more information about
the content channel, see
Content channel video
support.
Usage
tips
Page 94 of 132