Feedback Receivers - Cisco TelePresence 7010 Help Manual

Logs

Feedback receivers

The TelePresence Server publishes feedback events so that any receivers listening to it can take action
when something changes. To see the list of feedback receivers, click
You can clear all configured feedback receivers by clicking Delete all. You cannot undo this action.
Each receiver in the list has the following details:
Table 61: Feedback receiver details
Field
Index
Receiver URI
Source Identifier
Notification events subscribed
to
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Field description
The position of the receiver in the list
of receivers.
The fully qualified URI of the
receiver.
The identifier used by the
TelePresence Server when sending
feedback to this receiver.
A list of feedback events to which
this receiver is subscribed.
Logs > Feedback receivers.
Usage tips
The receiver may be a software
application, for example Cisco
TelePresence Management Suite,
that can respond to the feedback
events with an appropriate API call to
retrieve the list of changes from the
feedback source.
Source Identifier defaults to the
MAC address of the TelePresence
Server if an identifier is not specified
when the feedback receiver is
configured.
Each feedback receiver may be
configured to listen for a selection of
notifications from the TelePresence
Server. Feedback receivers are
configured via calls to the
TelePresence Server's API.
Page 112 of 132