Cisco TelePresence 7010 Help Manual page 8

System status
Table 2: Feature keys
Field Field description
TelePresence Whether or not the unit is enabled.
Server 8710
activation or
TelePresence
Server 7010
activation
Encryption Whether or not encryption is enabled.
Cluster This feature allows MSE 8710 blades
support configured on the same Cisco TelePresence
MSE 8000 chassis to be linked together to
behave as a single unit.
This key does not apply to the 7010 platform,
as these appliances cannot be clustered.
Screen The number of screen licenses allocated to
licenses the TelePresence Server. In the case of a
cluster, this is the number of screen licenses
allocated to the whole cluster.
The number of allocated screen licenses can
be lower than the maximum that the system
can support.
Table 3: Conference status
Field Field description
Active The number of active conferences on this
conferences TelePresence Server.
Active The number of participants (of all types) that
participants are currently in conferences on this
TelePresence Server.
Previous The number of participants who were
participants previously participating in a conference (since
the last time the TelePresence Server
restarted).
Video ports The number of video ports in use on this
TelePresence Server.
Audio ports The number of audio-only ports in use on this
TelePresence Server.
Content ports The number of content channel ports in use on
this TelePresence Server.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
The TelePresence Server will not operate
without activation. This feature key is installed
before shipping.
The encryption feature key allows encrypted
conferences and HTTPS web management on
this TelePresence Server. Feature keys are
installed in the Configuration > Upgrade
page. See Upgrading and backing up the
TelePresence Server.
Up to four blades can form a cluster. See
Understanding clustering.
If you want to cluster blades, each blade must
have the Cluster support feature key installed.
Feature keys are installed on the
Configuration > Upgrade
Upgrading and backing up the TelePresence
Server
You need to install a screen license key to
enable screen licenses. For more information
about licenses, see Understanding your
TelePresence Server's conferencing capacity
[p.126].
Usage tips
A conference is active if it has participants.
The numbers are those supported by the
number of screen licenses available on the
TelePresence Server and dependent upon
whether the TelePresence Server is
configured to run in HD or Full HD mode.
See Content channel video support
Understanding your TelePresence Server's
conferencing capacity [p.126].
page. See
and
Page 8 of 132