Cisco TelePresence 7010 Help Manual page 22

Network settings
Table 14: IP route configuration (continued)
Field Field description
Route Use this field to control how packets destined
for addresses matching the specified pattern
are routed.
To view or delete an existing IP route
The page displays the following details for each route:
The IP address pattern and mask
n
Where matching packets will be routed, with the possibilities being:
n
Port A—meaning the default gateway configured for Port A
l
<IP address>—a specific address has been chosen
l
Whether the route has been configured automatically as a consequence of other settings, or manually
n
added by you.
The default routes are configured automatically by your choice of Default gateway preferences for IPv4 and
IPv6 (see Configuring network
not matched by your manually configured routes will be routed via the default gateway.
You can delete manually configured routes. Select the check boxes next to the routes then click Delete
selected.
Current routes tables
Each table shows all configured routes (both manual and automatic) for IPv4 and IPv6 for the TelePresence
Server's Ethernet port. If you want to change the IP configuration for the Ethernet port, go to
Network settings.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
settings) and cannot be deleted. Any packets destined for addresses that are
Usage tips
You may select Port A, or Gateway. If you
select Gateway, enter the IP address of the
gateway to which you want packets to be
directed.
If you select Port A, matching packets will be
routed to Port A's default gateway (see
Configuring network settings).
Network >
Page 22 of 132