Cisco TelePresence 7010 Help Manual page 47

Configuration
Table 28: Default advanced endpoint settings (continued)
Field Field description
Video transmit Allows the TelePresence Server to vary the
size optimization resolution, or resolution and codec, of the
video being sent to a remote endpoint within
the video channel established to that
endpoint.
Select a setting from the drop-down list:
None: Do not allow video to be optimized
n
during transmission
Dynamic resolution only: Allow video size
n
to be optimized during transmission
Dynamic codec and resolution: Allow
n
video size and codec to be changed
during transmission
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
With this option enabled, the TelePresence
Server can, for instance, decide to send CIF
video within a 4CIF channel if this will
increase the viewed video quality.
The circumstances under which decreasing
the video resolution can improve the video
quality include:
if the original size of the viewed video is
n
smaller than the outgoing channel
if the remote endpoint has used flow
n
control commands to reduce the
bandwidth of the TelePresence Server
video transmission
Typically, lowering the resolution means that
the TelePresence Server can transmit video
at a higher frame-rate.
The default is Dynamic codec and
resolution.
Page 47 of 132