Displaying Endpoint And Group Status - Cisco TelePresence 7010 Help Manual

Endpoints and endpoint groups

Displaying endpoint and group status

The endpoint status is only available when the endpoint is part of an active conference in Remotely Managed
mode. You can control the endpoint to some extent from here.
1. Go to Endpoints
2. Click on an endpoint or group name
3. Review or control the endpoint, with reference to the following table
4. Refresh the page in your browser to get the latest status.
Table 39: Endpoint-supplied information
Field Field description
Country These fields display information as returned by
code/extension the endpoint. The details may not be supplied
in a consistent manner between
Manufacturer
manufacturers.
code
Product
Version
Table 40: Status
Field Field description
Connected Whether the endpoint is currently
to in a conference, and if so the
conference name of the conference.
Call status Whether the call is connected and
if so, if it is an incoming or
outgoing call.
Protocol The protocol used in this call e.g.
SIP.
Call-in IP The IP address of the endpoint or
address endpoint group on an incoming
call.
Call-in For H.323 incoming calls, the
E.164 E.164 address with which the
endpoint or endpoint group is
registered with the gatekeeper.
For SIP incoming calls, the SIP
username with which the
endpoint or endpoint group is
registered with the SIP registrar.
Call-in The name that the endpoint or
name endpoint group sends to the
TelePresence Server for an
incoming call.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
This information is displayed after the
endpoint has been connected for the first time
(regardless of whether it is currently
connected or not).
Usage tips
Click the conference name to go to the status page for that
conference.
Page 78 of 132