Cisco TelePresence 7010 Help Manual page 51

Configuration
The button may be Browse... or Choose File or similar, depending on your browser.
7. Click Upload software image. The browser begins uploading the file to the TelePresence Server, and a
new browser window opens to indicate the progress of the upload. When finished, the browser window
refreshes and indicates that the "Loader image upgrade completed."
8. The upgrade status displays in the Loader upgrade status field.
9. Shut down and restart the TelePresence
Backing up and restoring the configuration
The Back up and restore section of the
the configuration of the TelePresence Server using the web interface. This enables you to either go back to a
previous configuration after making changes or to effectively clone a unit by copying its configuration to
another.
To back up the configuration, click Save backup file and save the resulting configuration.xml file to a secure
location.
To restore configuration at a later date:
1. Go to Configuration > Upgrade.
2. Locate and select a previously-saved configuration.xml file.
The button may be Browse... or Choose File or similar, depending on your browser.
3. Select whether you want the saved configuration to overwrite the current Network settings, User
settings, or both.
The overwrite controls are not selected by default; the software assumes you want to preserve existing
network settings and user accounts.
4. Click Restore backup file.
When restoring a new configuration file to a TelePresence Server you can control which parts of the
configuration are overwritten:
If you check Network settings, the network configuration will be overwritten with the network settings in
n
the supplied file.
Typically, you would only select this check box if you are restoring from a file backed up from the same
TelePresence Server or if you are intending to replace an out of service TelePresence Server.
If you copy the network settings from a different, active, TelePresence Server and there is a clash (for
instance, both are now configured to use the same fixed IP address) one or both devices may become
unreachable via IP. If you do not check Network settings, the restore operation will not overwrite the
existing network settings, with the one exception of the QoS settings. QoS settings are overwritten
regardless of the Network settings check box.
If you check User settings, the current user accounts and passwords will be overwritten with those in the
n
supplied file.
If you overwrite the user settings and there is no user account in the restored file corresponding to your
n
current login, you will need to log in again after the file has been uploaded.
Enabling TelePresence Server features
The TelePresence Server requires activation before most of its features can be used. (If the TelePresence
Server has not been activated, the banner at the top of the web interface will show a prominent warning; in
every other respect the web interface will look and behave normally.)
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Server.
Configuration > Upgrade page allows you to back up and restore
Page 51 of 132